CONSTRUCTION
|
Material
|
Nitrile Rubber
|
|
Logo/Image Material
|
Polymetric film
|
|
Thickness
|
3/16 inch (0.1875")
|
STANDARDS & TESTING
- Passes DOC-FF1-70 for surface flammability
A digital print on polymetric film allows customers to customize the Bar Impressions mat with logos, images, and messages.
|
Minimum Text Height
|
1/2" (includes lowercase text)
|
|
Minimum Line Thickness
|
1/16"
|
These text requirements are for general use; however, special fonts and very thin letter forms may need to be made larger or thicker and will be approached on a case-by-case basis.
The background color of the imprint area should not be set to white. It is difficult to keep the logo clean through the manufacturing process.
Powerclips in CorelDraw files must be avoided.
*We will do our best to match a PMS color, however, color matching can be extremely challenging. Although we can get close, color is never an exact science and variations will occur. An exact color match is vulnerable to many factors, including the fact that we use a hot press to combine the rubber surface and cushion backing. Heat from the press often causes the color to lighten. Typically, we can get close to most PMS colors, but the final color may be a few shades off. For the PMS color to be as close as possible, we require additional time to create the proof sketch. Specific PMS colors may be matched for a one-time additional fee of $270.38 per PMS color.
